{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "22089",
"externalIdentifier": {
"partNumber": "2036"
}
},
"description": [{
"fullImage": "/images/product/images/2036_med.gif",
"shortDescription": "Prince Two-Way Detent Valve, Model# LS-3010-2",
"longDescription": "For open center systems. Two-way detent; 3/4in. in/out & 3/4in. work ports. Relief valve adjustable to 2750 PSI, preset at 2250 PSI, flow rating up to 25 GPM. Automatically kicks back to neutral when cylinder completes stroke. Built-in relief valve ports. Hydraulic balanced, hard chrome plated spool. Handle can be installed in up or down position. Detent release pressure adjustable from 600 to 2000 PSI. Warning: using a pressure detent in both directions can be dangerous. U.S.A."
}],
"offerPrice": "Only $109.99",
"wasPrice": "",
"salePrice": "",
"productRating": "5",
"productNumRatings": "5",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_22089_22089"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "7261",
"externalIdentifier": {
"partNumber": "2033"
}
},
"description": [{
"fullImage": "/images/product/images/2033_med.gif",
"shortDescription": "Prince Two-Spool Control Valve, Model# RD522GCGA5A4B1",
"longDescription": "Two spool to 25 GPM. With one standard 4-way port and one float. 3/4in. inlet and outlet ports; 1/2in. working ports. Valve will accept power beyond conversion plug. Internal load check. Relief pressure set at 2000 PSI; adjustable from 1500 PSI to 3000 PSI. Load check for each valve. U.S.A."
}],
"offerPrice": "Only $249.99",
"wasPrice": "",
"salePrice": "",
"productRating": "4.8",
"productNumRatings": "9",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_7261_7261"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "36398",
"externalIdentifier": {
"partNumber": "2032"
}
},
"description": [{
"fullImage": "/images/product/images/2032_med.gif",
"shortDescription": "Prince One Spool Control Valve, Model# HC-V-R22",
"longDescription": "4-way with floats; has balanced spools with select fit. Load checks to prevent load drops when shifting directions. Good for use on snowplows, dozers, loaders etc. Float valves allow blade or bracket to float along ground. Will accept power beyond plug conversion. Relief preset at 2000 PSI. Adjustable from 1500 to 3000 PSI. U.S.A."
}],
"offerPrice": "Only $179.99",
"wasPrice": "",
"salePrice": "",
"productRating": "5",
"productNumRatings": "4",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_36398_36398"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200339049",
"externalIdentifier": {
"partNumber": "201612"
}
},
"description": [{
"fullImage": "/images/product/images/201612_med.gif",
"shortDescription": "Prince Control Valve — 4-Way/3-Position Cylinder Spool, Model# SVW1BA1",
"longDescription": "Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with double-acting cylinders. U.S.A.<br><br>Product shown is representational; actual unit is single-valve body only."
}],
"offerPrice": "Only $104.99",
"wasPrice": "",
"salePrice": "",
"productRating": "4.5",
"productNumRatings": "2",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200339049_200339049"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "29442",
"externalIdentifier": {
"partNumber": "905412"
}
},
"description": [{
"fullImage": "/images/product/images/905412_med.gif",
"shortDescription": "Prince Welded Tee Cylinder — 2500 PSI, 2 1/2in. Bore, 12in. Stroke, 1 3/8in. Shank, Model# PMC-5412",
"longDescription": "Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. U.S.A."
}],
"offerPrice": "Only $209.99",
"wasPrice": "",
"salePrice": "",
"productRating": "4",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_29442_29442"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200311691",
"externalIdentifier": {
"partNumber": "20111"
}
},
"description": [{
"fullImage": "/images/product/images/20111_med.gif",
"shortDescription": "Prince Standard 3-Way Control Valve, Model# RD-2575-T3-ESA1",
"longDescription": "A control valve for operating single-acting cylinders. This valve has 3 ports, 3-position spring center to neutral and adjustable relief valve. Relief valve preset at 1500 PSI, adjusts up to 3000 PSI. Convertible from open to closed center. 3/4in. in/out ports, 1/2in. working ports. U.S.A."
}],
"offerPrice": "Only $129.99",
"wasPrice": "",
"salePrice": "",
"productRating": "4",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200311691_200311691"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "23489",
"externalIdentifier": {
"partNumber": "909012"
}
},
"description": [{
"fullImage": "/images/product/images/909012_med.gif",
"shortDescription": "Prince Tie-Rod Cylinder — 3000 PSI, 2in. Bore, 12in. Stroke, 1 1/8in. Shaft",
"longDescription": "Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A."
}],
"offerPrice": "Only $189.99",
"wasPrice": "",
"salePrice": "",
"productRating": "5",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_23489_23489"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200381955",
"externalIdentifier": {
"partNumber": "204601"
}
},
"description": [{
"fullImage": "/images/product/images/204601_med.gif",
"shortDescription": "Prince Crossover Relief Valve, Model# DRV-4HH",
"longDescription": "This Prince crossover relief valve is used in systems that require crossover relief protection such as reversible hydraulic motors, or systems that require a cushion valve such as a double-acting cylinder. U.S.A."
}],
"offerPrice": "Only $109.99",
"wasPrice": "",
"salePrice": "",
"productRating": "5",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200381955_200381955"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200339053",
"externalIdentifier": {
"partNumber": "201613"
}
},
"description": [{
"fullImage": "/images/product/images/201613_med.gif",
"shortDescription": "Prince Control Valve — 4-Way/3-Position Motor Spool, Model# SVW1CA1",
"longDescription": "Sectional body hydraulic directional control valves for mobile and industrial hydraulic systems. For use with hydraulic motors. Use with double-acting cylinders. <br><br>Product shown is representational; actual unit is single-valve body only. U.S.A."
}],
"offerPrice": "Only $109.99",
"wasPrice": "",
"salePrice": "",
"productRating": "5",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200339053_200339053"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "25613",
"externalIdentifier": {
"partNumber": "908410"
}
},
"description": [{
"fullImage": "/images/product/images/908410_med.gif",
"shortDescription": "Prince Tie-Rod Cylinder — 2500 PSI, 2in.Bore, 10in.Stroke, 1in. Shaft",
"longDescription": "Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. Seal kits are available also. U.S.A."
}],
"offerPrice": "Only $179.99",
"wasPrice": "",
"salePrice": "",
"productRating": "4.5",
"productNumRatings": "2",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_25613_25613"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200419671",
"externalIdentifier": {
"partNumber": "204607"
}
},
"description": [{
"fullImage": "/images/product/images/204607_med.gif",
"shortDescription": "Prince Hydraulic Control Valve — 8 GPM, 2-Spool, Model# MB21BB5C1",
"longDescription": "This Prince hydraulic control valve features a compact design that is ideal for small tractors and other low flow operations. SAE #8 ports eliminate leakage, enclosed handles eliminate exposure to elements. 4-way, 3-position spring center; can be converted to closed center or Power Beyond. 3500 max. PSI; 2000–3500 PSI adjustable relief, preset at 2500 PSI."
}],
"offerPrice": "Only $214.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200419671_200419671"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "23217",
"externalIdentifier": {
"partNumber": "908308"
}
},
"description": [{
"fullImage": "/images/product/images/908308_med.gif",
"shortDescription": "Prince Welded Tee Cylinder — 2500 PSI, 3in.Bore, 8in.Stroke, 1 1/2in. Shaft, Model# PMC-8308",
"longDescription": "Universal end mountings. A favorite for contractors, industrial, and agricultural applications. All steel welded construction: weld-on cross tube. Heavy wall steel tubing, ground and polished chrome piston rod with pin eye, cast iron piston. O-rings and back up washers, trac-type gland retainer. Maximum working PSI is 2500, bursting PSI is 5000. 2 1/2in. bore cylinders have 3/4in. pin holes. The 3in. and 3 1/2in. bore cylinders have 1in. pin holes. The 4in. bore cylinders have 1 1/4in. pin holes. 2 1/2in. bore cylinders have 3/8in. working ports. The rest have 1/2in. working ports. Double acting. U.S.A."
}],
"offerPrice": "Only $209.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_23217_23217"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "200335621",
"externalIdentifier": {
"partNumber": "2041"
}
},
"description": [{
"fullImage": "/images/product/images/2041_med.gif",
"shortDescription": "Prince Adjustable Flow Control Valve — 3/4in. Port Size, Model# RD-175-30",
"longDescription": "Prince Adjustable Flow Control Valve controls the speed of hydraulic motors. This type of valve will start and stop a hydraulic motor or cylinder and vary the speed over a wide range. Once the speed is set it will remain constant regardless of load variation. Any remaining flow is bypassed to the excess flow port to return to tank or to power another hydraulic function. U.S.A."
}],
"offerPrice": "Only $109.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_200335621_200335621"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "36724",
"externalIdentifier": {
"partNumber": "2046"
}
},
"description": [{
"fullImage": "/images/product/images/2046_med.gif",
"shortDescription": "Prince Divider/Combiner Valve-8GPM",
"longDescription": "The model RD-1500 divider/combiner valve. Flow into the inlet will be divided proportionally to the outlets and flow back into the outlets will be divided proportionally to the inlet. This will divide and combine for use on double acting cylinders and reversible motors. U.S.A."
}],
"offerPrice": "Only $199.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_36724_36724"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "23486",
"externalIdentifier": {
"partNumber": "907108"
}
},
"description": [{
"fullImage": "/images/product/images/907108_med.gif",
"shortDescription": "Prince Double-Acting Tie-Rod Cylinder — 2500 PSI, 3in. Bore, 8in. Stroke, 1 1/8in. Shaft",
"longDescription": "Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 2500 and bursting PSI is 5000. Seal kits are available also. U.S.A."
}],
"offerPrice": "Only $189.99",
"wasPrice": "",
"salePrice": "",
"productRating": "",
"productNumRatings": "0",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_23486_23486"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "36721",
"externalIdentifier": {
"partNumber": "2049"
}
},
"description": [{
"fullImage": "/images/product/images/2049_med.gif",
"shortDescription": "Prince Priority Flow Divider — 30 GPM Capacity, Model# PFG51-3/4",
"longDescription": "Prince Priority Flow Divider has adjustable orifice. One flow is constant and unaffected by input flow variations or load changes. The other port is an excess flow that can provide another circuit. U.S.A."
}],
"offerPrice": "Only $139.99",
"wasPrice": "",
"salePrice": "",
"productRating": "1",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_36721_36721"
}
{"catalogEntry": {
"catalogEntryIdentifier": {
"uniqueID": "48211",
"externalIdentifier": {
"partNumber": "909308"
}
},
"description": [{
"fullImage": "/images/product/images/909308_med.gif",
"shortDescription": "Prince Tie-Rod Cylinder — 3000 PSI, 3 1/2in. Bore, 8in. Stroke, 1 3/8in. Shaft",
"longDescription": "Tie-rod construction, double-acting, heavy-duty, high-strength tie rods. With ground and polished chromed piston rod, cast iron piston with O-ring seals and back up washers, polyurethane rod wiper, cast malleable rod clevis, zinc plated pins and clips. The maximum working PSI is 3000 and bursting PSI is 5000. Seal kits are available also. U.S.A."
}],
"offerPrice": "Only $209.99",
"wasPrice": "",
"salePrice": "",
"productRating": "4",
"productNumRatings": "1",
"shippingStatus": "In Stock"
},
"catalogEntryURL": "http://www.northerntool.com/shop/tools/product_48211_48211"
}